Care for your Upholstery

Upholstery Care

REGULAR, EASY‑CARE MAINTENANCE

• Try to keep pets off the upholstery and be careful of sharp objects such as belt buckles, toys and watch straps snagging the fabric.
• If snags do occur, carefully cut off the loose ends with scissors or tuck back in ‑ do not pull them under any circumstances.
• Discourage lively children from using your new suite as a climbing frame if you want to prolong its lifespan.
• Use protective arm caps where possible as this is the area most likely to show wear.
• Reversible seat and back cushions should be turned weekly and plumped up to maintain their shape.
• Upholstery can be lightly vacuumed or gently brushed to remove dust, but take care if vacuuming delicate fringe and braid details.
• Sitting on the front edges of cushions or on the arms of furniture may cause distortion or damage.
• Wood or decorative facings require minimal maintenance, and should be occasionally wiped with a damp cloth to remove dust. Do not use spray polishes or solvent cleaners, as these can have a damaging effect on both the facings and adjoining fabric.
• Fringes and ruching should be treated with care, especially when vacuuming.

STOP SPILLS BECOMING STAINS

• Do not use detergents.
• Do not try to wash or rub minor spills.
• To avoid damaging your upholstery, if you spill something on it, simply act quickly and mop up excess liquid with a clean white cloth.

CLEANING

• Always follow your manufacturer's cleaning and care label instructions.
• Clean your upholstery at least once a year and before soiling becomes ingrained.
• Clean all parts of a suite together, as slight colour changes can sometimes occur
• Vacuum or brush clean your upholstery

MOTION FURNITURE

• Motion furniture has many different designs and functions, and it is important that the manufacturer's operating and care instructions are correctly followed.
• Loose covers should be cleaned regularly in accordance with the manufacturer's instructions. Some slight shrinkage may arise on initial cleaning, but sufficient tolerance will have allowed for this.
• When removing and particularly when replacing loose covers, always take care with the carcass and cushion cover zips.
• Your covers are tailored to snugly fit the carcass, therefore identify the shapes prior to fitting.
• If washed, replace the covers when just slightly damp to ensure a better fit and less shrinkage or creasing.
• Do not replace covers if they are wet, as this could damage other materials.
• Allow the covers to settle on the furniture for a day or so. Ironing should not be necessary, but if this is required, iron the covers on the furniture using a damp cloth.

1. Locate the zip fastener. Fit the wing or rear of arm nearest the zip.
2. Fit the arm front.
3. Repeat on the opposite arm fixing.
4. Tuck covers on the inside of the arms and back of the seat.
5. Fit the valance stiffeners where applicable.
6. Close the zip, pulling the outside arm and back covers tightly to remove pressure from the zip itself.